Stone Master Molds Rubber Molds for Concrete, Slate Texture Wall and Column Cap/Hearthstone/Paver Mold, 24”L x 24”W x 2.5”D
$215.95
- Create your own concrete wall caps, approximately 24″L x24″W x 2.5″D
- Can also be used for Column Caps, Pavers, and Hearthstones.
- Production quality wall cap molds can be used hundreds of times
- Save tons of money and create your own custom colors
- NO RELEASE AGENT required
- Made in the USA
Stone Master Molds Concrete Cap Mold, 24″L x 24″W x 2.5″D
Create your own concrete wall caps with Stone Master Molds 24 inch Wall Cap mold. Besides Wall Caps, these rubber molds can also be used for Column Caps, Pavers, and Hearthstones. The finished product that you pour will be 24″ long x 24″ wide x 2.5″ thick at its widest point.
As for the appearance, the top of this mold has a Slate Texture and all four sides are chiseled. The approximate size of the mold is 27.5” by 27.5” by 3” thick and weighs approximately 32 lbs.
Of great benefit, our molds require NO release agent. Consequently, this saves you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds, urethane molds, and silicone molds.
Furthermore, you can pour hundreds of times with this professional quality mold!
Made in the USA, both materials and labor.
Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix for your 24 inch Wall Cap Mold:
This is one suggestion for mixing the concrete for the 24 inch Wall Cap molds. There are many other instructions available online, including videos.
BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT. We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer’s instructions for mixing.
If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc.
In addition, a plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives… NO RELEASE AGENT NECESSARY. Vibrate molds to release air bubble.
Finally, cure the concrete in the 24 inch Wall Cap molds for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Furthermore, the concrete wall stone molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.
rabealexander (verified owner) –
Excellent product !!
Susan Spring –
Thank you very much for the great review! We are so glad you are happy with your 24″ mold and appreciate your thoughtfulness for taking the time to leave us a review!
Susan Spring –
Thank you for your review! We’re glad to hear you’re happy with our 24×24″ wall cap mold. We truly appreciate your support and are grateful you chose Stone Master Rubber Molds. If you ever need anything or have questions, we’re always here to help!
Thomas Huff –
Great product
Susan Spring –
Thank you for the great feedback! We’re happy to hear you’re pleased with the product. We truly appreciate your support and are thankful you chose Stone Master Rubber Molds. If you ever have any questions or need assistance, we’re always here to help!
markdd8y1s –
Great value , very well made and fast delivery thank you
Susan Spring –
Thank you for your kind review! We’re glad to hear you found the mold to be a great value and well made, and that it arrived quickly. We truly appreciate your support and are grateful you chose Stone Master Rubber Molds. If you ever have any questions or need assistance, we’re always here to help!
tomb253 –
Excellent quality and lightning fast shipping too. This form will last a lifetime, already started using it today.
Susan Spring –
Thank you for the wonderful review! We’re thrilled to hear you’re happy with the quality and the fast shipping. It’s great to know you’ve already started using the mold and that it’s working well for you. We truly appreciate your support and thank you for choosing Stone Master Rubber Molds!