Stone Master Molds Rubber Molds for Concrete, Water Table Mold, Creates Three 18″L Water Tables – Window Sills
Stone Master Molds Rubber Molds for Concrete, Water Table Mold, Creates Three 18″L Water Tables – Window Sills
$148.95
- Each mold creates 3 sills measuring 18″Lx2.75Wx2.25″D
- Sills are tapered, plus include drip slot on the bottom to entice water away from building
- Production quality molds can be used hundreds of times
- Save money and create your own custom colors
- NO RELEASE AGENT required
- Made in USA
Stone Master Molds 18" Long Window Sill Mold
Stone Master Molds 18" water table - window sill mold creates 3 water tables measuring 18" long by 2.75" wide by 2.25" thickness at the back, tapering to 2" at the front. They also include a drip slot on the bottom to entice water away from the building.
Use this heavy duty mold for window sills, but also for borders between various building materials, such as stone and stucco or stone and brick.
To your advantage, our molds require NO release agent! Consequently, this saves you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds, urethane molds, and silicone molds.
Furthermore, you can pour hundreds of times with this professional quality mold!
Made in the USA, both materials and labor.
Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix for your Water Table - Window Sill Mold:
This is one suggestion for mixing the concrete for this mold. Of course, there are many other instructions available online, including videos.
BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT. We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer’s instructions for mixing.
If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc.
In addition, a plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives… NO RELEASE AGENT NECESSARY. Vibrate molds to release air bubble.
Finally, cure the concrete in the window sill molds for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Furthermore, molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.
3 reviews for Stone Master Molds Rubber Molds for Concrete, Water Table Mold, Creates Three 18″L Water Tables – Window Sills
Related products
-
Stone Master Molds Rubber Molds for Concrete, Slate Texture, Wall and Column Cap/Hearthstone/Paver, 17.25″x17.25″x2″
$135.95 -
Stone Master Molds Rubber Molds for Concrete, Slate Wall Cap Mold, 24″L x 12″W x 2″D
$139.95 -
Stone Master Molds Rubber Molds for Concrete, Limestone Trim Stone Mold, Creates Four 21″L x 4″W x 1″D Trim Stones
$139.95 -
Stone Master Molds Rubber Molds for Concrete, Window Sill Mold, Creates Three 24″L Water Tables / Window Sills
$168.95
Happy Bird –
Be sure to add rebar to the mortor or it will snap in two. I added wire to the rebar and used it to aid in attaching to side of building while the mortor set. Stained concrete with concrete stain paint. That way it is always a consistent color. Will add pics when done with project.
Pete the dragon –
This mold is amazing! I have used it about 10times and each one came out perfect! I used a releasing agent the first time because I have plastic molds and you must on those but the second time I didn’t and it worked just as good.
Nick Trolio –
Made about 200 of them….. like printing money