Stone Master Molds Rubber Molds for Concrete, Creates Two Water Tables / Window Sills, 20.25″L x 4.5″W x 2H” Each

Stone Master Molds Rubber Molds for Concrete, Creates Two Water Tables / Window Sills, 20.25″L x 4.5″W x 2H” Each

$125.95

Stone Master Molds 20.25″ water table mold creates 2 concrete/cast stone water tables measuring 20.25″ Long by 4.5″ Wide (Deep) by 2″ Height (Thick) to be used as window sills. These production quality molds will last for hundreds of pours, with proper care. Save money and create your own custom water tables for window sills. Our plastisol rubber molds never require a release agent, which saves time, money, and clean up.

Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix: This is one suggestion for mixing the concrete for manufactured stone. There are many other instructions available online, including videos. BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT. We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer’s instructions for mixing. If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc. A plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives… NO RELEASE AGENT NECESSARY. Vibrate molds to release air bubble. Cure in the molds for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.

Free Shipping
Check out our quantity discounts on all products. Discounts will show in Cart.

Title

Range

Discount

Items

2 - 3

5%

Items

4 - 6

10%

Items

7 - 99

15%

Water Table, Window Sill Rubber Mold, 20.25"L x 4.5"W x 2H"

  • Each mold creates two cast stone water tables that are 20.25" Long x 4.5" Wide (Deep) x 2" Height (Thick) to be used as window sills
  • Water tables are angled forward, to entice water away from building
  • No release agent necessary, saving you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds, urethane molds, and silicone molds
  • Production quality molds can be used hundreds of times with proper care
  • Made in the USA, both materials and labor

Reviews

There are no reviews yet.

Be the first to review “Stone Master Molds Rubber Molds for Concrete, Creates Two Water Tables / Window Sills, 20.25″L x 4.5″W x 2H” Each”

Your email address will not be published. Required fields are marked *