Stone Master Molds Rubber Molds for Concrete, Chiseled Stone Mold, Version 1

Stone Master Molds Chiseled Stone Mold, Version 1

Create your own chiseled stones with Stone Masters' professional grade rubber mold for concrete.  Deeply chiseled texture, with 4 straight-cut sides, the finished product that you pour will be 17.5" long x 11.5" wide by 1.5" thick.  Each piece covers approximately 1.4 square feet.  Consequently, this stone wall cladding can be grouted or dry stacked when installing.  The mold itself is approximately 19.25" long by 13.5" by 2.25" thick and weighs about 11 lbs.

Indeed, our molds require NO release agent.  Hence, this saves you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds, urethane molds, and silicone molds.

Furthermore, you can pour hundreds of times with this professional quality mold!

Made in the USA, both materials and labor.

Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix for your Chiseled Stone Molds:

This is one suggestion for mixing the concrete for the chiseled stone molds. There are many other instructions available online, including videos.

BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT. We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer’s instructions for mixing.

If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc.

In addition, a plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives… NO RELEASE AGENT NECESSARY. Vibrate molds to release air bubble.

Finally, cure the concrete in the chiseled stone molds for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Furthermore, molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.