Stone Master Molds Rubber Molds for Concrete, Trim Stone Mold, Creates 4 Trim Stones, 8″Lx6″Wx1.5″D Each

Stone Master Molds Rubber Molds for Concrete, Trim Stone Mold

Stone Master Mold’s Trim Stone Mold creates 4 concrete trim stones, 8″Lx6″Wx1.5″D each.  Trim Stones are very versatile accents designed to trim windows, doorways, fireplace surrounds and more.  Furthermore, the mold itself is 20″ long by 16″ wide by 2.5″ deep.  Save money and pour your own concrete trim stones.  Best of all, no release agent required!

Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix for your Trim Stone Molds:

This is one suggestion for mixing the concrete for the Trim Stones. Of course, there are many other instructions available online, including videos.

MOST IMPORTANTLY, BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT.

We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer’s instructions for mixing.

If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc. A plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives… NO RELEASE AGENT NECESSARY.

Next, vibrate the molds to release air bubble. Cure in the molds for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.