Stone Master Molds Rubber Molds for Concrete, Rustic Slate Texture, Wall Cap Mold, 28″L x 28″W x 3″D

Stone Master Molds Concrete Wall Cap Molds, 28″L x 28″W x 3″D

Create your own concrete wall caps with Stone Master Molds’ 28 inch Wall Cap mold.  In addition to Wall Caps, these rubber molds can also be used for Column Caps, Pavers, and Hearthstones. The finished product that you pour will be approximately 28″ long x 28″ wide x 3″ thick.

Duplicating the beauty and strength of natural stone, the top of this mold has a Rustic Slate Texture and all four sides are chiseled.  The approximate size of the mold is 31” long by 31” wide by 3.75” thick and weighs approximately 42 lbs.

Of significant advantage, our molds require NO release agent.  Consequently, this saves you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds, urethane molds, and silicone molds.

Furthermore, you can pour hundreds of times with this professional quality mold!

Made in the USA, both materials and labor.

Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix for your 28 inch Concrete Wall Cap Molds:

This is one suggestion for mixing the concrete for the 28 inch Wall Cap molds. There are many other instructions available online, including videos.

BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT. We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer’s instructions for mixing.

If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc.

In addition, a plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives… NO RELEASE AGENT NECESSARY. Vibrate molds to release air bubble.

Finally, cure the Concrete Wall Cap Molds for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Furthermore, the concrete wall cap molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.