Stone Master Molds Rubber Molds for Concrete, Rustic Brick Flat Mold

Stone Master Molds Rustic Brick Flat Mold for Concrete

Rustic Brick is a rugged, rounded brick with an Old World look in lengths of 9.75”-10.25”, widths of 2”-2.25”, and thicknesses of 1"-1.25". Rustic Brick pairs well with stucco and can also be mixed with stone for a highly Tuscan feel. Each Rustic Brick Mold for concrete makes approximately 2.5 square feet, grouted.

Also, each mold measures approximately 23.75" long by 11.5" wide, by 2.25" thick.

Our molds require NO release agent. This will save you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds, urethane molds, and silicone molds.

Matching Rustic Brick corner molds available.

Made in the USA, both materials and labor.

Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix for your Rustic Brick Mold for Concrete:

This is one suggestion for mixing the concrete for the Rustic Brick molds. There are many other instructions available online, including videos.

BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT. We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer’s instructions for mixing.

If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc.

Additionally, a plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives… NO RELEASE AGENT NECESSARY. Vibrate molds to release air bubble.

Finally, cure the concrete in the Rustic Brick molds for concrete for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.